Charger T-532CF
Category:
Peripheral device
itc charger provides a reliable and convenient solution for powering multiple wireless microphones and transmitters. By utilizing advanced charging technology, it facilitates quick and efficient recharging, ensuring that wireless microphones are always ready for use without interruption.
-
Input voltage DC 12V/150mA
-
Battery type AAA Hydrogen rechargeable battery
-
Charge current Maximum of about 200mA at 3V
-
Dimension 60×70×70mm (W×H×D)
- The charger is designed for pen-shaped microphones, only suitable for AAA Ni-MH rechargeable batteries. A single charger hole is for a single microphone only and can be used as an independent external power supply.
- The intelligent design of the charger, with overcharge protection and full-charged
- The charging stand can be used alone or in combination with each other. Either of the two power sockets is an input and the other is an output when combinations are used.
- The DC power jack of charger power input socket is positive(internal) negative(external), and external switching power supply.
- The DC power jacks of charger power output socket are positive(internal)and negative(external), and the connection cable is required to connect the next charger.
- Charging status indicator: red means it is charging, green means it is full-charged.
- Insert the pen-shaped microphone vertically, and the tail of the microphone is a circular charging disc, it can be charged as long as it is inserted into the charger.
- The connection plug on the side can connect to many charging bases, and the number of connected chargers should match the capacity of the switching power supply. Only a maximum of five 12V1A switching power supplies can be connected.
| Model | T-532CF |
| Input voltage | DC 12V/150mA |
| Battery type | AAA Hydrogen rechargeable battery |
| Charging mode | Stop charging when it is 80% saturated |
| Charge current | A maximum of about 200mA at 3V |
| Power placement mode | External switched power supply |
| Dimension | 60×70×70mm (W×H×D) |
| Weight | 75g(excluding switched power supply and power cable) |
| Working temperature | -10℃~40℃ |
Technical Specification
Some words for solution selections description
-
Charging for pen-shaped microphones
+Can be used as an independent external power supply
-
Overcharge protection and full-charged reminder
+ -
Used alone or in combination
+For combined usage, one for input and one for output
-
Charging status indicator
+- Red represents charging
- Green represents full-charged
Related products
Some words for solution selections description
GET IT TOUCH
Please use the following form to get in touch and we will get back to you within 24 hours. You can use any contact form plugin in this area.
CONTACT INFORMATION
Please use the following form to get in touch and we will get back to you within 24 hours. You can use any contact form plugin in this area.
-
itc Headquater
Building NO. A13-1, Yiku Industrial Park, The Hills, Dongyi Road, Panyu District, Guangzhou, China 511492
-
itc Factory
NO.1 Building B Block Zhongcun Street Panyu Guangzhou China
-
-
Call itc
+86-020-3937 8731
+86-18824115002 (whatsapp)
