Professional Digital Amplifier TS-4350PD
-
Output power (20-20KHz/THD≤1%) Stereo/Parallel 8Ω×4: 200W×4 ?Stereo/Parallel 4Ω×4: 350W×4 Bridge 8Ω×2: 700W×2
-
Input sensitivity 0.775V/1V/1.44V
-
Input impedance 10KΩ unbalanced, 20KΩ balanced
-
Frequency response (@1W power) 20Hz-20KHz/+0/-2dB
-
SNR (A-weighted) ≥95dB
- The latest class-Damplifier design, has low distortion and high efficiency.
- Switched power supply, with high efficiency; soft starter can prevent absorbing large currents into the power grid when starting up and interfering with other electrical devices.
- Effectively suppress power harmonics, meet the EU green power standard.
- An intelligent peak clipper controls the power module and speaker system to work within a safe range.
- Standard XLR + TRS1/4″ composite input interface, simple interface design is more convenient for different use
- The amplifier has three options of input sensitivity, which can easily accept a wide range of signal source input.
- Suitable for different places, stereo mode or bridge mode are optional.
- Grounded input pin and suspension control switch can effectively suppress noise.
- Withovervoltage protection, under voltage protection, over temperature voltage limit, over temperature shutdown, over current voltage limit, over current shutdown, DC protection, output short circuit protection, temperature control fan, amplifier frequency synchronization, PWM frequency synchronization, etc.
- Built-in recoverable unique cut-off switch.
- The dust-proof mesh of the panel is removable and washable.
Model | TS-4350PD |
Output power (20-20KHz/THD≤1%)
Stereo/Parallel 8Ω×4 |
200W×4 |
Output power (20-20KHz/THD≤1%)
Stereo/Parallel 4Ω×4 |
350W×4 |
Bridge 8ΩX2 | 700W×2 |
Connector | XLR, TRS interface |
Voltage gain (@1KHz) | 34.4dB |
Input sensitivity | 0.775V/1V/1.44V |
Input impedance | 10KΩ unbalanced, 20KΩ balanced |
Frequency response (@ 1W power) | 20-20KHz/+0/-2dB |
THD+N (@1/8 power) | ≤0.05% |
SNR (A-weighted) | ≥95dB |
Damping coefficient (@ 1KHz) | ≥200@ 8Ω |
Resolution (@1KHz) | ≥80dB |
Protection method | Over current protection, DC protection, short circuit protection |
Indicator light | Power, protection, distortion |
Cooling method | Fan cooling |
Power supply | ~ AC 220V 50Hz |
Maximum power consumption | 1800W |
Dimension | 483×350×88mm (L×W×H) |
Weight | 8.9Kg |
Technical Specification
Some words for solution selections description
-
Latest class-D amplifier design
+Low distortion and high efficiency
-
Switched power supply with high efficiency
+- Effectively suppress power harmonics
- Meet the EU green power standard
-
Intelligent peak clipper
+Control the power module and speakers to work in a safe range
-
Soft starter
+Prevent absorbing large currents when starting up and interfering with other devices
-
Built-in recoverable unique cut-off switch
+ -
Amplifier frequency synchronization
+PWM frequency synchronization
-
Comprehensive protective measures
+- Over-voltage protection
- Under voltage protection
- Over-temperature voltage limit
- Over temperature shutdown
- Over-current voltage limit
- Over-current shutdown
- DC protection
- Output short circuit protection
- Temperature control fan
Related products
Some words for solution selections description
GET IT TOUCH
Please use the following form to get in touch and we will get back to you within 24 hours. You can use any contact form plugin in this area.
CONTACT INFORMATION
Please use the following form to get in touch and we will get back to you within 24 hours. You can use any contact form plugin in this area.
-
itc Headquater
Building NO. A13-1, Yiku Industrial Park, The Hills, Dongyi Road, Panyu District, Guangzhou, China 511492
-
itc Factory
NO.1 Building B Block Zhongcun Street Panyu Guangzhou China
-
-
Call itc
+86-020-3937 8731
+86-18824115002 (whatsapp)